Nina's

Ladies & Gents! After several months of waiting and about 90 pure handmade working hours; I'm proud to present the newest creation by yours truly! A project for the amazingly beautiful Niina, from the fashion blog Nelliinan vaatehuone.

*Drum roll...*

Nina's

I think I was quite obedient to the original drawing, though some changes did occur. Naturally :)

Taken from her blog (28.2.2012): here.

Taken from her blog (26.10.2012): here.

Materials:

• Collar: Black suede with a black sheep nappa lining
• Bow: Black patent leather ring with black alcantara bows.
• Uppers: Cream white nubuck, Black patent leather.
• Heel: Black patent leather covered plastic heel.
• Sole: Vegetable tanned leather with an black 4mm rubber half sole.

What can I say? Well, I'm pretty satisfied with the outcome, being my first bespoke high heels... I'd say I'm REALLY pleased. There's a million little things that could've gone better, but then again a million little things that I learned. So that's a alot! 

I'll update images of Niina wearing them from her posts later on.
One can only say: Tally hooooo!

Making High Heel Boots - Part 4 The Fitting

With great uncertainty I sat in a tram, on my way to downtown. It was time to meet Niina and Saku for a fitting somewhere in Forum. The reasons for my uncertainty were clear: these were my first bespoke high heels, ever. I've taken a step into the unknown. An area where many shoemakers dare not step: fine ladies bespoke high heels. But my passion to take that step and defy my masters warnings was too great...
So there I was, sitting next to Niina, who keeps an amazing and popular fashion blog here in Finland, called Nelliinan vaatehuone. Our sushi's were eaten so it was time to learn the horrible truth: do they fit, or won't they?

Let's take a look:

I didn't go through this phase in my blog. I just mentioned about it on facebook: I actually made another version for the left foot. That means I drew the patterns again differently and added rubberband section to the mouth. I also cut new leathers, sew them, lasted, fixed the heel on and made a mockup outer sole. Lot's of work, but it was worth it.

While being quite unnecessary, I wanted to put a decent rubber on both of them. We had small surplus pieces, so they were perfect for this.

And this time I made a more astonishing looking bow :) You can see the rubberband insert underneath it.

And as a big relief, the boots were quite a perfect fit! I will have to do some changes to both the patterns and the lasts, but we're all set to start making the actual shoes. Maybe she'll get them before christmas ;)

Suurensuurella jännityksellä varattuna sovitin lauantaina Niinan saappaita. Kaikesta huolimatta istuvuus oli loistava, muutamaa tarpeellista pientä muutosta lukuunottamatta. Eli pian päästään tekemään lopulliset kengät valmiiksi! Cheerio :D

Making High Heel Boots - Part 3 The first mockup

Seriously, I'm so unsure about these lasts, that a second mockup is due for sure. It could of course be the voice of uncertainty, since it's my first bespoke high heel creation. Which is perfectly natural :)
Anywayhoo, today's program consists of first cutting away those individual pattern pieces from the basic design that my colleague Mr. Master Shoemaker Joonas conjured on the cardboard. Then it's leather cutting, leather skiving (=making the edges gradually thin, wherever needed), gluing & sewing and finally lasting these babies to see how they end up. It's ever so exciting!

First, I had to add more lines to the design :) Like allowances and such.

Here's a nifty tool: to copy the shapes from the design, you simply position another cardboard underneath it and start rolling that baby. Thus, there's a pattern waiting down under.

With necessary markings made, the patterns are cut out with a sharp knife.

And here's all the patterns and some leathers of which I'll do the mockup. A great chance to tryout that red handled clicker's (=upper cutter) knife. The ladies at our shop cut only with scissors, which is also accurate but more slow. Cutting your leathers with a knife is the traditional way to go and will save you a lot of time in contrast to first marking with a pen and then using scissors.

And all the pro's go: he's cutting from the neck!? Yes, dear fellow shoemakers I am. It's a mockup :)
Neck is usually not the best areas to cut your uppers from, since it has these dark stretch marks which you can maybe see in this picture. The best part of a cow is on the lower back and ass area.
On red, you'll see the stretching direction of the  leather on the neck area.
The blue arrows show the direction where we don't want the leather to stretch when compared to the pattern.

Cut away! The blade is amazing! Thanks cordwainertools :)

I took a traditional approach to markings as well: The small hole is made with a sharp spike.

Here's the whole family ready for skiving and sewing.

A close up of the skiving machine. The leather is fed from the left and it leans on the stopper. The foot is adjusted to the required skiving position and the rough stone pushes the leather towards that rotating round blade seen on the right.

Like so.

Voilá!

Some of the edges are contact glued to help sewing.

The glued surfaces are carefully placed together, and it's sewing time.

The shoe industry's special sewing machine with a pole base. This way it's easy to sew uppers which tend to have tight corners and shapes.

I wanted to try out a french fold on the upper part. A small but rewarding detail.

There it is, after 4 hours of manual labour.

A bow tie made with great haste ;)

Before lasting, I'll use contact glue to the upper edges of a heel counter, so I can put some carpenter's glue in between. This way I'll have them hard and durable.

The toe part needs a stiffener too.

Before lasting, the toe cap get's some carpenter's glue.

And it's a wrap! This image tells quite well how the uppers are stretched and attached to the bottom.
For those unfamiliar with the concept of lasting, check out my earlier post about the same subject: here.

Here it be. I managed to accidentally put the zipper to the outer side of the shoe. Oh well,  luckily it's just a mockup.

Back view.

View from the inner side. The cuts need some tweaking.

What say you? ;)

My vintage designs

As many of you might have noticed, I have a soft spot for vintage ladies shoes and designs. Right now there's something magical with the late 19th to early 20th century shoes. The earliest shoe designers started when the industrial revolution began, and shoes were getting cheaper, thanks to machinery. Before that every pair was completely hand made and took a hell of a lot more time to make and was thus also very heavy on one's purse. The industrial shoe making has climaxed to our time when you can get a pair of leather shoes for way less than 20€ from many stores. In contrast, completely hand made bespoke dress shoes cost about 2000€ - 3000€ in europe nowadays. And that's the starting price.

I can preach about that subject more in the future, now it's time to go back to business:

I drew these designs heavily inspired by some vintage shoes, and men's fancy dress shoes of old. There's just something very applicable when transforming classic men's dress shoe designs to women's high heels:

The left one's inspired by a boot design from the 1920's. The right one is an adaptation of a classic men's ankle boot model, that's still manufactured by some brands.

The Paubellarinas

Inspiration can happen anytime. Whether sitting in a bus, doing work or watching opera, anywhere. This time my inspiration was a blog, maybe the first fashion blog I've ever gone to: Paubellas. I wanted to dedicate these shoes for her and her blog with their name: The Paubellarinas. My first comment in history was about some ballerinas she wore, and I started to ramble about how I couldn't understand them for the sheer reason on non-aesthetics that I thought flat shoes in general possess. Well, I got her sympathy for not understanding women in this issue, but a moment later some designs for ballerinas started whirling in my mind. So I drew them down, and decided to start a project in making a pair. And here they are ready. Such is inspiration.

These were done bespoke for my wife, who also keeps a lovely and successful children's clothing blog called Unikuun terapiahuone, with lots of elaborate applications and tailoring, check it out! She was very pleased, which was a relief since I didn't let her affect the design. Except in one thing, as you'll see in a moment:

The main ingredients: Calf leather and alcantara (synthetic) uppers. Full Goat leather lining. Colored red leather sole with rubber inserts.

And there's the wish my client had: to have a heart shaped something in the soles.

The signatured red soles. I know it's a rip-off from Christian Louboutin, but they just look sooo good :D

Thank you all so much for following this project! What should I do next? High heels? What would YOU like to see made?